Your basket is empty.
Bonsaibikeshop Monkeypower parts for Honda Dax ... Parts Exhausts Dax Exhausts
Dax Exhausts
|
Product no.: 18360-GAN-620 P
Dax heat protection plate for exhaust for Dax from 1988 repro |
39.90 €
34.99 €
*
You save 12 %
Currently unavailable |
|
Product no.: 04-02-0365
Takegawa Sport exhaust Honda Dax ST125 JB04 made of stainless steel The original heat shield fits Volume: approx. 90DB |
539.90 €
*
Currently unavailable |
|
Product no.: 372
Exhaust under engine short, silencer insert removable
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The attachment leads to the expiry of the operating license unless it is entered into the vehicle documents by an approved TÜV testing center. |
67.90 €
*
In stock |
|
|
|
|
Product no.: 1400-ST125
Stainless steel Dax exhaust (similar to Kitaco) with heat shield in 6V look. The exhaust does not have a DB Killer installed, so it is significantly louder than the original. DB Killers with a 39 mm diameter fit, e.g. the one from NHRC (see below)
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
199.90 €
*
In stock |
|
|
|
|
Product no.: 1401-E4-Black
Stainless steel Dax exhaust (similar to Kitaco) with heat shield in 6V look. Now with a modified bracket, also fits engines up to 212cc With lambda sensor connection 14x1.25 thread (please note!) The exhaust does not have a DB Killer installed, so it is significantly louder than the original. DB Killers with a 39 mm diameter fit, e.g. the one from NHRC (see below) General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
159.90 €
*
In stock |
|
|
|
|
Product no.: 1424-end
Kepspeed rear silencer with E-No. for Kepspeed Monkey 125, there is no cat in the silencer Outer diameter of the silencer approx. 90mm Total length: approx. 300mm |
99.90 €
*
Currently unavailable |
|
Product no.: 5905220814008
Exhaust muffler, stainless steel silencer with DB Killer, dimensions see photo |
69.99 €
*
In stock |
|
|
|
|
Product no.: 04-02-0363
Underneath sports exhaust from Takegawa
Suitable for the Honda Dax ST125 JB04
Nearby exhaust noise: 90 dB(A) or less
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiry of the operating license. |
449.90 €
*
In stock |
|
|
|
|
Product no.: 1277-End
Round Kepspeed rear silencer, with removable DB killer and attachments. |
79.99 €
*
In stock |
|
|
|
|
Product no.: 1400-E4
Stainless steel Dax exhaust (similar to Kitaco) with heat shield in 6V look. Now with a modified bracket, also fits engines up to 212cc With lambda sensor connection 14x1.25 thread (please note!) The exhaust does not have a DB Killer installed, so it is significantly louder than the original. DB Killers with a 39 mm diameter fit, e.g. the one from NHRC (see below) General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
189.90 €
*
Currently unavailable |
|
Product no.: ABAEX007 /006
Universal heat protection plate approx. 18.5x7cm for round exhaust mufflers There are 4 galvanized clamps included (2x for approx. 38-64mm and 2x for approx. 80-100mm) |
19.90 €
*
In stock |
|
Product no.: N-0130a
NHRC exhaust on top for Skyteam Euro 4 vehicles Skymax Skymini with connection for lambda sensor Thread for the lambda probe: M14x1.25 General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license |
189.90 €
*
In stock |
|
|
|
|
Product no.: 1246
Bottom chrome exhaust, suitable for Monkey and Dax, but on the Dax it is not compatible with the main stand and also not suitable for use with a pillion passenger The Monkey should have at least a +4 swing arm installed for the exhaust
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
119.90 €
*
In stock |
|
|
|
|
Product no.: 1261
Dax & Monkey exhaust below from Kepspeed Does not fit the Dax if the main stand is installed and also not for use with a pillion passenger General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
179.90 €
*
Currently unavailable |
|
Product no.: 1262
Dax & Monkey exhaust below from Kepspeed Does not fit the Dax if the main stand is installed and also not for use with a pillion passenger General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
189.90 €
*
In stock |
|
|
|
|
Product no.: ZC8005 / ZC8007
2x exhaust 6mm cap nuts chrome long 30mm version |
2.90 €
/ pair(s)
*
In stock |
|
|
|
|
Product no.: 1277s
open stainless steel exhaust from Kepspeed GP 1, short rear silencer, additional silencer insert available in the shop (see accessories below) DB Killers with a diameter of 50-52mm fit Lambda sensor connection with M12x1.25 thread (see below under accessories for suitable lambda sensor, but a suitable screw for closing is also included so that the exhaust can also be used on other models) |
179.90 €
*
In stock |
|
|
|
|
Product no.: 1408
Stainless steel exhaust underneath Thanks to the thick manifold, the exhaust is also suitable for large engines. The exhaust does not have a DB eater installed, which is why it is very loud. DB eaters with a diameter of 52 mm fit.
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The attachment leads to the expiry of the operating license unless it is entered into the vehicle documents by an approved TÜV testing center, which may be possible with many older models built before 1988 |
149.90 €
129.90 €
*
You save 13 %
In stock |
|
|
|
|
Product no.: ZC8006
6 mm cap nuts 20mm long 2 pieces (also available in 30mm length in the shop, see accessories below) |
2.90 €
*
In stock |
|
|
|
|
Product no.: 18360-GAN-620 P-Set
Heat shield set for Dax 12V AB23 Skymax Skyteam replica, among others, front and rear |
44.99 €
*
Currently unavailable |
|
Product no.: 1409
Stainless steel exhaust below carbon look Thanks to the thick manifold, the exhaust is also suitable for large engines. The exhaust does not have a DB eater installed, which is why it is very loud. DB eaters with a diameter of 52 mm fit. General note: The item offered is an item without e marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The attachment leads to the expiry of the operating license unless it is entered into the vehicle documents by an approved TÜV testing center, which may be possible with many older models built before 1988 |
155.90 €
*
In stock |
|
|
|
|
Product no.: 1401N
Stainless steel Dax exhaust in black (similar to Kitaco) with heat shield in 6V look. Now with a modified bracket, also fits engines up to 212cc The exhaust does not have a DB Killer installed, so it is significantly louder than the original. DB Killers with a diameter of 39 mm fit General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license. |
179.00 €
*
Currently unavailable |
|
Product no.: OP119
Adapter for mounting standard Dax and Monkey exhaust systems on YX engines 160ccm that have KLX heads installed (or the standard 155 Skyteam Zongshen engine)
The motors offered in our shop all have the “normal head” so the adapter is not needed |
20.99 €
*
In stock |
|
|
|
|
Product no.: 1297 2017070010
DB Killer catalytic converter for insertion into the rear silencer or exhaust manifold Suitable, among other things. for the Kepspeed exhaust systems below, outer diameter 51mm does not fit overhead exhaust 1423 |
14.90 €
*
In stock |
|
|
|
|
Product no.: 1529
Heat shield suitable for Dax 6 V exhaust and Kitaco Dax exhaust, does not fit 12 V replica exhaust |
29.90 €
*
In stock |
|
Product no.: NHRCE4o
NHRC Dax exhaust for Euro 4 vehicles with connection for lambda sensor Thread for the lambda probe: M14x1.25
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license |
199.90 €
*
In stock |
|
Product no.: 950
Overhead Dax exhaust, stainless steel New version with lambda sensor connection, thread M14X1.25 Please note: As you can see in the picture, the original indicators are too close to the exhaust as they are attached directly to the luggage rack General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The attachment leads to the expiry of the operating license unless it is entered into the vehicle documents by an approved TÜV testing center |
129.90 €
*
In stock |
|
|
|
|
Product no.: 18361-098-672
Original heat protection plate for exhaust old 6V models up to BJ. '88
without screws and attachments |
29.90 €
*
In stock |
|
Product no.: 18281-098-671
rear heat shield for Dax 6V exhaust (exhaust manifold)
Front sheet metal also available in the shop |
11.90 €
*
In stock |
|
Product no.: 1323
real carbon heat shield Dax 6V version, |
94.90 €
*
In stock |
|
|
|
| 1 - 30 of 50 results |
|