intake manifold
| 1 - 30 of 32 results |
|
|
Product no.: 6553
Intake manifold for Honda MT MB MTX 18mm |
9.99 € * In stock |
|
|
|
|
Product no.: 252
Intake manifold set with rubber flange for mikuni VM24, VM26, PE 26 |
33.90 €
29.90 € * You save 12 %
In stock |
|
|
|
|
Product no.: 0684
Intake manifold for Dax replica 20mm with 48mm screw spacing, please note dimensions in photo 3
→ When installed, the intake manifold points straight to the rear |
17.90 € * In stock |
|
|
|
|
Product no.: 728
Polished intake manifold available in 20mm, 22mm, or 26mm diameter → The course of the 20mm intake manifold goes straight to the rear, while the 22 and 26mm intake manifold runs diagonally to the side |
14.99 € * In stock |
|
Product no.: 902
rotatable short intake manifold for Mikuni VM 24/26. Diameter carburettor side 27mm, engine side 25mm → Height from bottom edge to top edge: approx. 73mm → Height from bottom edge to middle screws: approx. 53mm |
19.90 € * Currently unavailable |
|
Product no.: 17111-165-620P MBB171A
Repro Monkey Z50R intake manifold, but also fits other Honda Monkeys, only fits the original carburettor or repro carburettor with 32.5mm screw spacing. |
19.99 € * In stock |
|
|
|
|
Product no.: 410-1020516
High-quality Kitaco intake manifold → Suitable for the Honda Chaly CF50 and others |
67.90 € * In stock |
|
|
|
|
Product no.: 0684M-20mm
Small intake manifold for Monkey, screw distance from the engine 45mm to the carburettor 48mm, intake manifold points straight to the rear when mounted.
Height of lower edge - center of carburettor attachment: approx. 48mm,
Height lower edge - upper edge: approx. 62mm |
14.90 € * In stock |
|
|
|
|
Product no.: 410-1015506
High quality Kitaco Monkey intake manifold → Inner diameter to carburettor: 22mm, |
69.90 € * Currently unavailable |
|
Product no.: 11770-398
Intake manifold for Honda SS50, CD 50, CD 90 silver, horizontal connection, inside 13/15 mm, |
18.90 € * In stock |
|
|
|
|
Product no.: 727 / ZE3051B
Intake manifold 23mm, course goes out diagonally to the side. Height from bottom edge to center of carburettor attachment: approx. 50mm → Screw distance carburettor attachment: 48mm (center-center hole) The screws shown are available separately from us and are not included in the scope of delivery (M6X20mm) |
14.99 € * In stock |
|
|
|
|
Product no.: PTBA3051
Intake manifold 28mm for YX 160 Dax Monkey etc. |
13.99 € * In stock |
|
|
|
|
Product no.: RZK3051
Intake manifold for Romet Zetka 50ccm |
9.99 € * In stock |
|
|
|
|
Product no.: HMT niedr. FL
Rotatable stainless steel HMT intake manifold, low version for Monkey → 28.5mm inner diameter, 34.5mm carburettor connection → Suitable for Mikuni VM26 and also 28 PWK carburetors |
75.90 € * In stock |
|
|
|
|
Product no.: 17111-165-620
Original Honda Z50R intake manifold, but also fits other Honda Monkeys, only fits the original carburettor or repro carburettor with 32.5mm screw spacing. |
34.90 € * In stock |
|
|
|
|
Product no.: HMT hoch FL
Rotatable stainless steel HMT intake manifold, high version for Dax → 28.5mm inner diameter 34.5mm carburettor connection → Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 75mm |
75.90 € * In stock |
|
|
|
|
Product no.: HMT niedr. Kl
Rotatable stainless steel HMT intake manifold low version for Monkey → 28.5mm inner diameter 34.5mm carburettor connection → Suitable for Mikuni VM26 and also 28 PWK carburetors |
75.90 € * Still in stock |
|
|
|
|
Product no.: HMT hoch dayt
Rotatable stainless steel HMT intake manifold, high version for Dax, suitable for Daytona Anima and Zongshen 190-212ccm engines → 28.5mm inner diameter, 34.5mm carburettor connection → Suitable for Mikuni VM26 and also 28 PWK carburetors |
75.90 € * In stock |
|
|
|
|
Product no.: HMT Hoch kl
Rotatable stainless steel HMT intake manifold, high version for Dax with clamping bridges → 28.5mm inner diameter 34.5mm carburettor connection → Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 75mm |
75.90 € * In stock |
|
|
|
Stainless steel intake manifold rotatable for Daytona Zongshen 190/212 low flange connection, MonkeyRotatable stainless steel HMT intake manifold low version for Monkey, suitable for Daytona Anima and Zongshen 190-212ccm engines → 28.5mm inner diameter, 34.5mm carburettor connection → Suitable for Mikuni VM26 and also 28 PWK carburetors |
75.90 € * In stock |
|
|
|
|
Product no.: 1787B / 252
Intake manifold rotatable rubber flange for Mikuni VM 24 / 26 and others carburetors → inner diameter of rubber flange 33mm, inner diameter of intake manifold approx. 26mm |
23.99 € * In stock |
|
|
|
|
Product no.: KRG257
Black 17mm intake manifold (points straight to the rear of the engine) → screw distance to the carburettor 48mm, height approx. 55mm |
16.90 € * In stock |
|
|
|
|
Product no.: 0014a
Intake manifold complete set, 3-way adjustable → click here to see dimensions |
19.90 € * In stock |
|
|
|
|
Product no.: 272
Rotatable intake manifold (complete as photo) with rubber flange suitable for Mikini VM 24, Mikuni VM 26, Keihin PE24, PE28 and others.
→ Rubber flange diameter approx. 32mm, screw spacing 48mm,
Screw distance to motor: 45mm (center-center hole) |
29.90 € * Still in stock |
|
|
|
|
Product no.: V-0037
Original Skyteam PBR 125 Intake Manifold → Inner diameter: approx. 25mm, Bolt spacing to carburetor: 48mm (center-center hole), Bolt spacing to motor: 45mm (center-center hole), Height: approx. 88mm (lower edge - middle screw attachment carburetor) |
22.90 € * Currently unavailable |
|
Product no.: 252c
Rotatable intake manifold
→ Inner diameter approx. 26mm,
Screw distance to the carburettor 48mm and to the cylinder head 45mm (measured from center - center of bore) |
17.99 € * In stock |
|
|
|
|
Product no.: 88253
Daytona ANIMA intake manifold with rubber flange (original Daytona) |
54.90 € * In stock |
|
|
|
|
Product no.: 0684M ZC3054B
Small intake manifold for Monkey, screw distance from the engine 45mm to the carburettor 48mm, intake manifold points straight to the rear when mounted.
→ Height of lower edge - center of carburettor attachment: approx. 48mm,
Height lower edge - upper edge: approx. 62mm |
14.90 € * In stock |
|
|
|
|
Product no.: 1788-2
Intake manifold for Zongshen 190ccm engine and Daytona Animma engines, available with or without rubber flange → 27mm inner diameter intake manifold, 56mm screw distance hole center - hole center, 30mm inner diameter flange |
25.90 € * In stock |
|
Product no.: ZC3053
Intake manifold for engines with overhead electric starter, suitable for Romet, Zipp and others. Click here to see dimensions |
16.90 € * In stock |
|
|
|
| 1 - 30 of 32 results |
|
