Product no.: 72650 72SMK
72 cc big bore kit for 6 v engine, including cylinder head with large 20/23 mm valves steel cylinder with 72 cc imprint Suitable for Honda Dax ST50 Chaly CF50 Monkey Z50A Z50 J1 J2 SS50 and other 6 volt engines |
149.90 €
*
In stock |
|
Product no.: TBW9066
146ccm big bore kit for Skyteam Lifan among others with 13mm piston pin cylinder length 79mm We recommend the Lifan cylinder head with large valves (see accessories below) |
269.90 €
*
In stock |
|
Product no.: TBW90-67
Big Bore Kit 141ccm, for 120/125ccm engines with 52.4mm bore and 55mm stroke 120ccm is stated because many 125ccm engines only have 120ccm in reality despite 125ccm printing Lightweight aluminum cylinder (78 mm high), does not fit engines that have a 69mm long cylinder installed Oversized cooling fins on the cylinder for efficient heat dissipation 57mm high compression piston with rings, pin and clips (14mm piston pin) Head and base gasket seal kit Please note: Only fits engines with 52.4mm bore x 55mm stroke 14mm piston pin A cylinder head with 23/27 valves must also be installed (see accessories below) |
269.90 €
*
Currently unavailable |
Product no.: 352-0006600
Piston rings for Kitaco 164ccm Kit MSX/ Monkey Z125
Also suitable for Kawasaki KLX KSR engines 110-143 |
21.90 €
*
In stock |
|
Product no.: 214-1083112
Kitaco Big Bore Kit 88ccm with cylinder head with large valves and sharp camshaft
Suitable for 12 volt Honda Dax Monkey Chaly and also replica engines such as Skyteam etc.
At least a PC20 is recommended as a carburetor |
399.90 €
*
In stock |
|
Product no.: 85-ST70
Big Bore Set 85ccm 51mm consisting of: 51mm 6 volt piston for ST70 head |
89.90 €
*
In stock |
|
Product no.: 1110014002
72cc cylinder kit for Mash 50 Euro5 including matching injection nozzle
General note: The item offered is an item without e-marking / tuning item that is intended for racing purposes and customizing. Therefore, use on public roads is not permitted. The cultivation leads to the expiration of the operating license |
199.99 €
*
In stock |
|
Product no.: 212-1444150EX
164 cc Big Bore kit, for MSX / grom / Monkey Z 125, 60mm, for stroke 57.9mm
Notes:
The Kitaco injection nozzle must also be installed and does not fit JB03
There is also kitaco i map for the msx, see accessories below
Installing the kit will invalidate the road approval and the vehicle may then only be used off-road. In addition, installing the kit will void the vehicle’s warranty.
For instructions see product data sheet |
189.99 €
*
In stock |
Product no.: 96803
Daytona 88ccm New Hyper Kit, parts like photo Suitable for Honda Dax Monkey 12 volt engines The New Hyper Kit has almost 1 hp more power than the other Daytona 88ccm kit Compression ratio increased from 10.7:1 to 11.0:1 |
459.99 €
*
In stock |
|
Product no.: 5905220834518( 72A)
72ccm kit with cylinder head, 72ccm imprint, suitable for 12 volt engine, cylinder head has EGR connection. as is also the case with Kepspeed 50 cc vehicles |
99.90 €
*
In stock |
|
Product no.: 5905220834518 (49A)
72cc kit with cylinder head, 49cc imprint
Suitable for 12 volt engines, cylinder head has EGR connection, like Kepspeed 50 cc vehicles |
129.90 €
*
In stock |
|
Product no.: DAY88401
Daytona SOHC 2 valve engine conversion kit Big Bore with 88ccm for 12 volt engines (Skyteam, Honda, Lifan etc.) Cylinder head with racing camshaft, 22/25 mm valves and accessories as shown in the photo Recommended carburetor larger PE 24 (at least 22mm carburetor) Without cc information on cylinder |
329.90 €
*
In stock |
|
Product no.: 214-1014202
High-quality big bore 88ccm kit from Kitaco, with cylinder head suitable for Honda Dax Monkey SS50 and others.
Only fits 6 volt engines, parts like photo without camshaft. For suitable camshafts, see accessories below |
379.90 €
*
Currently unavailable |
Product no.: 01-05-3008
88ccm kit from Takegawa suitable for Honda Dax ST70 and others with racing camshaft, only fits if the ST 70 head with 22/25mm valves is installed.
Does not fit the 50 standard head |
339.90 €
*
In stock |
|
Product no.: 215-1015001
88ccm big bore kit from Kitaco for 6 volt engine, Dax Monkey Chaly,
Only fits if the ST 70 head is installed. Does not fit standard 50 head
52mm Nikasil cylinder |
289.90 €
*
Currently unavailable |
Product no.: CYK012/AY3511
60 cc kit with 49 cc print, suitable for 50 cc 12 volt engine (Skyteam, Honda AB23, Lifan etc.) The kit can be used with an original 50 cc carburettor, but the jetting may need to be adjusted slightly Cylinder 43 mm, piston set + seals |
59.90 €
*
In stock |
|
Product no.: 214-1013402
Kitaco 88ccm kit suitable for Honda Dax ST50 Honda Monkey Z50 and other 6V engines.
Suitable for standard 50cc head and the 916 head (see accessories below) (not suitable for ST70 head) |
139.90 €
*
In stock |
|
Product no.: 851250MK
Big Bore Kit for 12 V engine 85 cc suitable for Skyteam Dax Monkey Skymini Skymax and other 12 volt engines Consisting of: |
169.90 €
149.90 €
*
You save 12 %
In stock |
Product no.: 7265049SMK
72ccm Big Bore Kit suitable for 6 Volt Honda Dax Monkey etc. Suitable for Honda Dax ST50 Chaly CF50 Monkey Z50A Z50 J1 J2 SS50 and other 6 volt engines |
159.90 €
*
In stock |
|
Product no.: 0027
Big Bore Kit 212cc for Zongshen 190cc engine, 2 valve pistons with piston rings, aluminum cylinder with steel bushing and seals
also available with 4 valve pistons for Daytona Anima 190 |
215.90 €
*
Still in stock |
Product no.: Day 80117
212cc kit for Daytona 190 4 valve start engine (cylinder is cut out in one place) but also fits on daytona 190 without estart (not suitable for Zongshen 190) |
299.90 €
*
In stock |
|
Product no.: TBW0936a
Complete 88ccm TB Parts Racing big bore kit for 12 volt engine (Honda, Skyteam etc.) with racing cylinder head 22 / 25 mm valves, piston and camshaft and accessories as shown in the photo without ccm imprint on the cylinder |
569.90 €
*
In stock |
|
Product no.: TB 1
Big Bore Kit from TB parts. 88 cc for 6 or 12 v engine with 50 head, without cc information on the cylinder The cylinder head 916 fits |
199.90 €
*
In stock |
Product no.: 212-1013480
Kitaco Big Bore Kit light 75 cc 48mm, for 6V engine with 50 head
49cc imprint
Available with silver or black cylinders |
139.90 €
129.90 €
*
You save 7 %
In stock |
Product no.: 85650mk
85ccm big bore kit suitable for 6 volt Honda engines Consisting of: We also recommend a reinforced oil pump (see accessories below) |
189.90 €
*
In stock |
Product no.: 85650ok
85ccm Big Bore Kit 51mm 6 Volt suitable for Honda Dax ST50 SS50 Monkey Z50A Z50 J1 J2 Chaly CF50 and other 6 Volt engines Suitable for the 50 head, not suitable for the ST70 head |
129.90 €
*
In stock |
Product no.: 851250ok
12 Volt Big Bore Kit suitable for 12V motor with 50 head such as Skyteam Dax Monkey Skymax Skymini Honda Dax AB23 Monkey Z50 J2 etc. Consisting of: Alternatively also available as a complete set with cylinder head with large valves |
119.90 €
*
In stock |
Product no.: 72650 72a
72 cc big bore kit steel cylinder or aluminum cylinder with 72 cc imprint or 49cm imprint suitable for 6 v engine 50 head. We recommend cylinder head type 916 Suitable for Honda Dax ST50, Honda Monkey Z50A Z50J1, Honda SS50 and other 6 volt engines |
99.90 €
*
In stock |
Product no.: 72670okb
Cylinder kit, aluminum cylinder 72ccm with 49ccm imprint |
129.90 €
*
Still in stock |
|
Product no.: 7265049a
72 cc Big Bore kit suitable for 6v engine (50 head) we recommend cylinder head type 916 Cylinder with 49cc imprint Suitable for Honda Dax ST50 Monkey Z50A Z50 J1 SS50 and other 6 volt Honda engines |
129.90 €
*
Still in stock |
|
1 - 30 of 35 results |
|