Product no.: 2098
Brake caliper, fits for Skyteam Upside Down Fork, Skymax Pro, Le Mans Pro also for our forks Art.-No. 1725 / 1724 |
36.99 €
*
In stock |
|
Product no.: 90305-169-000
Nut for Honda Axles 12 x 1.25 |
3.99 €
*
In stock |
|
Product no.: AA0119
Fork oil level measuring tool set, 60ml, tool for filling and checking the amount of oil |
14.99 €
*
In stock |
|
Product no.: 51425-118-023
Front fork Dust seal for many Honda Models CB50, CY50, CY80 XL50, CB125J, CB125S SL70, XL70, XL80, XR75, XR80 |
11.29 €
*
Still in stock |
|
Product no.: STR012
Steering head bearing set with steering head nut and steering head nut in chrome Suitable for many Honda, Dax Monkey Chaly SS50 CD50 C50 CY 50 XL 50 etc. as well as replica vehicles The bearings have the dimensions: 22.5mm at the top and 24mm at the bottom |
14.99 €
*
Currently unavailable |
Product no.: ZT5211
Axle 195 mm (measured without head) |
9.90 €
*
In stock |
|
Product no.: 7369200 / 705-001
Quality tapered roller bearing set suitable for Honda Dax Monkey Skyteam Skymax Skymini etc. |
36.90 €
*
In stock |
|
Product no.: ZD0014b
Flange nut m12 x 1.25 gold for Dax Monkey wheel axles etc. |
0.69 €
*
In stock |
|
Product no.: 4432/10335101610
Shim 10mm inside
Available in 3 thicknesses: 0.5mm, 1.0mm or 1.5mm |
0.49 €
*
In stock |
Product no.: 51432-051-000P
Repro fork seal set for Honda dax 12 volt, SS50, CD50 etc.
for 25x35 (does not fit replica Dax forks) |
9.99 €
*
In stock |
|
Product no.: 0839B-Kepspeed
ALU CNC lamp holder suitable for 45mm USD fork. New version with slightlyahorter headlight brackets, length measured from the middle of the fork leg - middle of the headlight screw approx. 110mm |
69.90 €
/ pair(s)
*
Currently unavailable |
Product no.: 90304-159-00p/STR02
Steering head nut chrome Dax Monkey SS50 Chaly Skyteam etc. |
2.99 €
*
Currently unavailable |
Product no.: 98901
Original Daytona fork inserts Screw fastening suitable for the 6 Volt Monkey models (Z50A / Z50 J1) |
489.90 €
/ pair(s)
*
Currently unavailable |
Product no.: 98893
Daytona fork inserts hydraulic With clamp attachment suitable for the Honda Monkey Z50 J2 / Z50 G Gorilla fork |
419.90 €
/ pair(s)
*
In stock |
|
Product no.: 4432/10335121810
Shim 12mm inside available in 3 thicknesses 0.5mm, 1.0mm, 2.0mm |
0.49 €
*
In stock |
Product no.: 795881
Valvoline SynPower Fork Oil 15W is a fully synthetic premium fork oil for motorcycles, scooters, mopeds and quads. It is designed to provide smooth fork movements and optimal damping, even in extreme conditions such as off-road use. This fully synthetic fork oil offers smooth damping at very high and very low temperatures due to its high viscosity index. The product protects the suspension from wear, corrosion and oxidation and offers excellent seal compatibility.
Note on the waste oil regulations Waste oils are liquids that are both flammable and hazardous to water. Therefore, used oils must be disposed of at a waste oil collection point after use. Any improper disposal of used oil endangers the environment. The addition of foreign substances such as solvents, brake fluids and coolants is prohibited. In accordance with the Waste Oil Ordinance, we are obliged to take back the following used oils free of charge: combustion engine oils - gear oils - oil filters and the oil-containing waste that regularly arises when changing the oil. You can return the used oil to us in the amount that corresponds to the amount you purchased from us. The return location is our registered office: Karl Funke e.K In der Heide 8 32584 Löhne You can return the oils there at any time during our opening hours. Alternatively, you can also send us the used oil if you cover the shipping costs. If you send us the used oil by shipping, please note that special transport conditions may apply for used oil. In principle, waste oil can also be disposed of at gas stations or recycling centers (e.g. local recycling center), sometimes for a fee. The local community information office will be happy to provide you with information about the possibility of disposing of used oil. If you have any questions about the disposal of used oil, please contact us. We will be happy to advise you. If you are a commercial end user, we would like to point out that we may use third parties to fulfill our acceptance obligations to you. |
12.99 €
*
In stock |
|
Product no.: 51517-K20-901
Rubber stop for Honda MSX 125ccm fork 2014-2015
Figure #14 |
19.90 €
*
In stock |
|
Product no.: 0226
Fork extensions left and right, for 26mm -30mm hydraulic fork tubes. available in 30 or 50mm length Diameter: approx. 26mm Can also be installed on a 30mm fork Does not fit rattle fork |
29.90 €
*
In stock |
Product no.: 1725-1
Wheel hub set consisting of wheel hub, brake disc diameter 220 mm, 18.5 mm offset and axle 12x255mm |
59.99 €
39.99 €
*
You save 33 %
In stock |
|
Product no.: ND5928010
Removal tool removal aid for fork seal ring |
19.99 €
*
In stock |
|
Product no.: 53215-120-000
Washer for lower steering head bearing Inside approx. 24.8mm Outside approx. 38mm Thickness approx. 2.5mm
Fig. No. 8 on picture 3 |
3.69 €
*
In stock |
|
Product no.: 53215-001-000
Washer for the lower steering head bearing for Dax Monkey Chaly 6 Volt etc.
(Item no. 7 on picture 3)
Outer diameter: approx. 37mm
Inner diameter: approx. 24.2mm
Thickness: approx. 0.7mm |
2.59 €
*
In stock |
|
Product no.: 0076-gb
Dax Fork Bridge from the replica Dax fork, but the original Honda fork inserts also fit
2nd choice, there are small scratches or similar, hence the sale at a special price |
39.99 €
*
In stock |
|
Product no.: 90503-051-870
Washer for the steering head nut on the fork bridge at the top (Figure No. 25 on Figure 3) available as original Honda or repro Outer diameter: approx. 36.0mm Inner diameter: approx. 22.5mm |
1.59 €
*
In stock |
Product no.: GAK
Fork bridge/handlebar bridge for standard 30 mm Dax Monkey PBR telescopic fork (fork tubes are pushed up about 2cm) this shortens the length of the fork |
29.90 €
*
In stock |
|
Product no.: 51507-165-000
Washer fork part for Honda Z50 J2 fork (No. 11 on picture 3) |
2.99 €
*
In stock |
|
Product no.: 599/600
Aluminum nut for fork bridge with Dax or Monkey illustration |
13.90 €
*
In stock |
Product no.: 94520-34000
Safety clip fork part for Honda Z50 J2 fork etc. No. 13 from the drawing |
2.99 €
*
In stock |
|
Product no.: 0941
Replica fork tubes, fork inserts for 6V Dax (rattle fork) available in 55cm or 58cm length measured to the middle of the axis |
89.90 €
/ pair(s)
*
In stock |
1 - 30 of 119 results |
|