Product no.: 252
Intake manifold set with rubber flange for mikuni vm 24 Vm 26 PE 26 |
33.90 €
29.90 €
*
You save 12 %
In stock |
|
Product no.: 728
Polished intake manifold available in 20mm, 22mm, or 26mm diameter, please specify desired size when ordering The course of the 20mm intake manifold goes straight to the rear, while the 22 and 26mm intake manifold runs diagonally to the side Screw distance to the carburettor 48mm, to the cylinder head 45mm (center - center hole in each case) Height measured from bottom edge - center screws for carburettor fastening: 20mm intake manifold (= approx. 55mm) |
14.99 €
*
In stock |
Product no.: PTBA3051
Intake manifold 28mm for YX 160 Dax Monkey etc. |
13.99 €
*
In stock |
|
Product no.: 0014a
Intake manifold complete set, 3-way adjustable Dimensions of intake manifold: Dimensions of rubber flange: |
19.90 €
*
In stock |
|
Product no.: V-0037
Original Skyteam PBR 125 Ansaugstutzen Innendurchmesser: ca. 25mm Schraubenabstand zum Vergaser: 48mm (Mitte-Mitte Loch) Schraubenabstand zum Motor: 45mm (Mitte-Mitte Loch) Höhe: ca. 88mm (Unterkante - Mitte Schraubbefestigung Vergaser) |
22.90 €
*
In stock |
|
Product no.: HMT niedr. FL
Rotatable stainless steel HMT intake manifold low version for Monkey 28.5mm inner diameter 34.5mm carburettor connection Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 65mm |
75.90 €
*
In stock |
|
Product no.: HMT hoch FL
Rotatable stainless steel HMT intake manifold, high version for Dax 28.5mm inner diameter 34.5mm carburettor connection Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 75mm |
75.90 €
*
In stock |
|
Product no.: HMT Hoch kl
Rotatable stainless steel HMT intake manifold, high version for Dax with clamping bridges 28.5mm inner diameter 34.5mm carburettor connection Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 75mm |
75.90 €
*
In stock |
|
Product no.: HMT niedr. Kl
Rotatable stainless steel HMT intake manifold low version for Monkey 28.5mm inner diameter 34.5mm carburettor connection Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 65mm |
75.90 €
*
In stock |
|
Stainless steel intake manifold rotatable for Daytona Zongshen 190/212 High with flange connection fRotatable stainless steel HMT intake manifold high version for Dax, suitable for Daytona Anima and Zongshen 190-212ccm engines 28.5mm inner diameter 34.5mm carburettor connection Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 75mm |
75.90 €
*
In stock |
|
Stainless steel intake manifold rotatable for Daytona Zongshen 190/212 low flange connection, for MoRotatable stainless steel HMT intake manifold low version for Monkey, suitable for Daytona Anima and Zongshen 190-212ccm engines 28.5mm inner diameter 34.5mm carburettor connection Suitable for Mikuni VM26 and also 28 PWK carburetors Height from bottom edge to top edge of intake manifold: 65mm |
75.90 €
*
In stock |
|
Product no.: 1787B / 252
Intake manifold rotatable rubber flange for Mikuni VM 24 26 and others, inner diameter of rubber flange 33mm, inner diameter of intake manifold approx. 26mm |
23.99 €
*
In stock |
|
Product no.: 272
Rotatable intake manifold (complete as photo) with rubber flange suitable for Mikini VM 24, Mikuni VM 26, Keihin PE24, PE28 and others.
Rubber flange diameter approx. 32mm, screw spacing 48mm
Screw distance to motor: 45mm (center-center hole)
Height approx. 72mm and length approx. 62mm (measured from the outermost point)
Inner diameter to the motor: approx. 26mm
Inner diameter of the carburettor: approx. 28mm
The engine, carburettor and air filter shown are not included in the scope of delivery and are available separately from us |
29.90 €
*
In stock |
|
Product no.: 252c
Rotatable intake manifold
Inner diameter approx. 26mm
Screw distance to the carburettor 48mm and to the cylinder head 45mm (measured from center - center of bore) |
17.99 €
*
In stock |
|
Product no.: 88253
Daytona ANIMA intake manifold with rubber flange (original Daytona) |
54.90 €
*
In stock |
|
Product no.: 1788-2
Intake manifold for Zongshen 190ccm engine and Daytona Animma engines, available with or without rubber flange 27mm inner diameter intake manifold 56mm screw distance hole center - hole center 30mm inner diameter flange |
25.90 €
*
In stock |
Product no.: 1343
extra long intake manifold for Honda chaly for 28mm carburettor (does not fit standard carburettor) |
29.90 €
*
Currently unavailable |
Product no.: 0734
intake manifold for skyteam 125 etc. without connections |
14.90 €
*
In stock |
|